Ramone's House of Body Art

Speedway of the South video board and track

feeds@yuku.com (Piston) — Fri, 25 Dec 2009 21:09:53 GMT

Well, my attempt at the Speedway of the South video board and track didn't turn out too bad so I thought I would share this with everyone. Santa brought this for my son on Christmas. It could have been a little better, but for a playset it is perfect. Thank you to many of you that helped me secure all the crew chief's, pitty's and race cars. In total, the set featured 12 cars, 6 pits, and a few "fans".

Merry Christmas to everyone.

Chris
...

Removing Blister

feeds@yuku.com (rpag) — Tue, 22 Dec 2009 12:55:03 GMT

Is there a way to remove the blister from a card without damaging the card? You know, without the glue sticking to the cardback tearing the cardback with the blister. All I have found is a way to remove the paper from the blister after it is removed. Thanks!

custom launcher artist needed

feeds@yuku.com (bentaxle) — Sun, 20 Dec 2009 01:06:17 GMT

I need somebody to make about 15 custom Pit Race Off launchers for me. Had some done already but my artist seems to have disapeared.

The last two racers? Anybody?

feeds@yuku.com (fire1035) — Thu, 10 Dec 2009 13:46:26 GMT

So we are down to the last two racers to complete my son's set. Anybody have the artwork for Gask Its and Tach O Mint? I would like to get these last two completed for the boy without spending a day's pay to get one on ebay. Any help would be appreciated!

Motor Speedway of the South logo needed!

feeds@yuku.com (Piston) — Mon, 30 Nov 2009 07:46:25 GMT

I am making a replica Motor Speedway of the South track for my son for Christmas. I must say, so far it's pretty sweet. I'm working on the video board right now and need a high-resolution "Motor Speedway of the South" logo. Can anyone help?

Please email me at ctbork@yahoo.com

Thanks!!!!

Chris

Head and Tail lights

feeds@yuku.com (ecruz154) — Wed, 25 Nov 2009 12:37:00 GMT

Does anyone have regular plain headlights and tail lights without numbers on them or know what thread I can find them?
Also, whats the easiest way to paint the eyes area white so as to not have that scared bug eyes McQueen look? ,,lol, especially when the car is not white color..

Doc's Building Artwork?

feeds@yuku.com (irocer) — Tue, 24 Nov 2009 14:59:48 GMT

I am trying to build my son Doc's place for a Christmas gift. I had saved the images a while back and now seem to be missing one sheet with some of the parts. I have looked around and cannot find the earlier post with this stuff. Can someone point it out for me? Or can whoever designed this re-post it here for me?

Thanks in advance for any help!
Stewart

testing

feeds@yuku.com (GotFrank) — Sat, 21 Nov 2009 19:54:44 GMT

So yeah just testing to make sure the new sig. wasn't too big.
And I thought I could delete the post...but... Anyway check
out the new signature by Atomicjarrod

Question on Decals/Logos

feeds@yuku.com (ecruz154) — Tue, 17 Nov 2009 05:38:12 GMT

I see some great decals like Wall-E, Bugs Life, and many others. Are these decals for sale somewhere so I can buy them or are they all made at home with printer and decal paper?

I'm interested in getting Ben 10 decals for a custom I wanna make for my oldest son as a B-Day surprise.

Any help is appreciated!

Decals question

feeds@yuku.com (ecruz154) — Mon, 16 Nov 2009 08:44:25 GMT

Rivet removal

feeds@yuku.com (ecruz154) — Sun, 15 Nov 2009 13:58:31 GMT

Can anyone tell me what size bit I need to use to remove the rivets from under the cars and what do i use to place back once custom is finished? Am i just breaking the mushroom top of river or drilling all the way through?

Custom McQueens

feeds@yuku.com (ecruz154) — Sun, 15 Nov 2009 13:00:34 GMT

Hi;

I'm new to this forum and site so please forgive me if I'm in the wrong forum. I am looking for instructions on making custom McQueen cars for my boys. I basicvally know the paint removal and stuff like that but the only issue I am having is the removal of the plastic underpart which has the 2 metal rivets holding it in place. My question is, does anyone know how to easily remove these rivets for disassemble and how to place them back without causing major damage?
...

Made Me A Ghostlight

feeds@yuku.com (GotFrank) — Sat, 07 Nov 2009 18:47:46 GMT

I got tired of looking for a tiny lantern to convert into a Ghostlight.
So I made one from bits & pieces I had laying around.

Added the wire guards.

So since Wally the Hauler is back out again.... Apple graphics anyone?

feeds@yuku.com (fire1035) — Thu, 05 Nov 2009 19:21:08 GMT

Has anybody made any progress on graphics for the smaller haulers as of yet? I picked one up today to tool around with but I am pretty much useless when it comes to artwork. Any help would be awesome.

Custom 4-Pack!!

feeds@yuku.com (matorfan) — Sat, 31 Oct 2009 15:57:54 GMT

Hey guys I thought I would show a Custom Kyle Busch 4-Pack I did for a guy. Tell me what you think. They are M&M's, Interstate Batteries, Snickers, and the NOS is a Nationwide car and it took me a while to do that one.

Thanks

Need Rusteze spoiler logo please

feeds@yuku.com (mamapunkin) — Wed, 28 Oct 2009 01:49:31 GMT

Hello!
I'm looking for the Rusteze logo that is on McQueen's rear spoiler, (not the round one). Does anyone have a good pic they could share?
I've searched high and low for this, so if it is somewhere obvious, I am terribly sorry. It always seems that what you are searching for is right in front of your face the whole time! Thanks for all your help

I need help

feeds@yuku.com (gonzalj) — Thu, 22 Oct 2009 20:13:01 GMT

I want to try and build a back drop for my Gradsons Pedal cars for when we take them to car shows. I thought of doing the front-middle of Ramone's House of Body Art, only I have been having a hard time finding suitable pictures. Are there any pictures or drawings someone could point me to? or know of where I can go to get some detailed pictures?

Thanks for your help.

Here is a picture of my 2 year old Grandsons car

Latest creation, Marco flyover

feeds@yuku.com (fire1035) — Thu, 15 Oct 2009 16:41:36 GMT

Made this up for The Boy's room. I have been meaning to make it for about a year now and just couldn't...

Custom Cardbacks

feeds@yuku.com (indykjt) — Fri, 09 Oct 2009 14:27:04 GMT

Is there anyone out there who can help me out by making some custom cardbacks? I am interested in a ROR style, and a Kmart Day 3 racer style (once we get them next weekend!).

Please email me at Admin@carscares.org if you can help!

Modify!

feeds@yuku.com (GotFrank) — Thu, 08 Oct 2009 21:50:56 GMT

A quick Tokyo Mater custom.